Biosorption of nickel and cadmium using Pachira aquatica Aubl. peel biochar.

This study aimed to assess the value of Pachira aquatica Aubl. fruit peels by exploring their applicability in the biosorption process for the removal of Ni(II) and Cd(II) metal ions. The Pachira aquatica Aubl. fruit peel biochar (PAB) was extensively characterized through various techniques, including proximate analysis, helium pycnometer, XRD, SEM, point of zero charge determination, zeta potential measurement, and Boehm titration. Subsequently, kinetic, isotherm, and thermodynamic batch biosorption studies were conducted, followed by column biosorption tests. The characteristics of PAB, including low moisture content, a neutral point of zero charge, porosity, an irregular and heterogeneous structure, a negatively charged surface, and the presence of functional groups, indicate its remarkable capacity for efficiently binding with heavy metals. Biosorption equilibrium time was achieved at 300 min for both ions, fitting well with a pseudo second-order kinetic model and Langmuir isotherm model. These data suggest that the biosorption process occurred chemically in monolayer. The column C presented an exhaust volume of 1200 mL for Ni(II) and 1080 for Cd(II) and removal of 98% and 99% of removal for Ni(II) and Cd(II), respectively. In summary, PAB demonstrates substantial potential as a biosorbent for effectively removing heavy metals, making a valuable contribution to the valorization of this co-product and the mitigation of environmental pollution.

Renewable aromatics through catalytic flash pyrolysis of pineapple crown leaves using HZSM-5 synthesized with RHA and diatomite.

The influence of reactor temperature of 300  and 600 °C and the acidity of the ZSM-5 and HZSM-5 catalysts on the pyrolysis product yields of the pineapple crown leaves have been investigated in a fixed bed reactor Py-GC/MS. The ZSM-5 catalyst was hydrothermally synthesized with a Si/Al ratio 50, using residual diatomite and rice husk ash as alternative sources of Al and Si for catalyst cost reduction. For the HZSM-5 synthesis, calcined ZSM-5 was activated by ion exchange between Na+ and H+. The catalysts structure was confirmed by the XRD and Rietveld treatment, SEM, FTIR, FRX, TGA and BET results. Analytical pyrolysis of the biomass was carried out at 500 °C in a Py-5200 HP-R pyrolyzer connected to the GC/MS and the pyrolysis vapors were transported to a catalytic bed at 300 and 600 °C. The results showed that the increase in the catalytic bed temperature promoted increased the aromatic content. The main pyrolysis products of the PCL were oxygenated compounds that were converted at 600 °C using the HZSM-5 catalyst into high value renewable aromatic compounds for the chemical industry, such as benzene, toluene, xylene, etilbenzene, thereby confirming the deoxygenation activity of synthesized catalyst to produce renewable aromatics compounds which are important platform chemicals and precursors for jet fuels, gases, polymers and solvents.

Characterization and pyrolysis of Chlorella vulgaris and Arthrospira platensis: potential of bio-oil and chemical production by Py-GC/MS analysis.

Biofuels have been seen as potential sources to meet future energy demand as a renewable and sustainable energy source. Despite the fact that the production technology of first-generation biofuels is consolidated, these biofuels are produced from foods crops such as grains, sugar cane, and vegetable oils competing with food for crop use and agricultural land. In recent years, it was found that microalgae have the potential to provide a viable alternative to fossil fuels as source of biofuels without compromising food supplies or arable land. On this scenario, this paper aims to demonstrate the energetic potential to produce bio-oil and chemicals from microalgae Chlorella vulgaris and Arthrospira platensis. The potential of these biomasses was evaluated in terms of physical-chemical characterization, thermogravimetric analysis, and analytical pyrolysis interfaced with gas chromatograph (Py-GC/MS). The results show that C. vulgaris and A. platensis are biomasses with a high heating value (24.60 and 22.43 MJ/kg) and low ash content, showing a high percentage of volatile matter (72.49 and 79.42%). These characteristics confirm their energetic potential for conversion process through pyrolysis, whereby some important aromatic compounds such as toluene, styrene, and phenol were identified as pyrolysis products, which could turn these microalgae a potential for biofuels and bioproduct production through the pyrolysis.